A powerful descaler for sanitation and construction areas

Removal of cement residue; i.e. final cleaning by acidification as a last step when laying panels, after curing of the sealant, and to remove limescale or efflorescence. Before starting, wet joints and highly absorbent panels thoroughly with cold water. Dilute durgol forte at a 1: 3 ratio (durgol: water). Apply the solution evenly with a cloth or brush, then leave it to act for five minutes. Do not allow the solution to dry. Thoroughly scrub the surface. Rinse immediately with plenty of cold water. Rinse the cloth or sponge frequently and always use clear water. Repeat if necessary. Allow to dry completely. When treating larger surfaces, work on sections of max. 4 m2 at a time. One 1,000 ml bottle of durgol forte cleans an area of approximately 20 m2 to 60 m2, depending on the level of contamination.

Removing limescale: use cold water to moisten the clay pot thoroughly. Dilute durgol forte at a 1:1 ratio (durgol: water). Pour the solution into the pot so that it covers all the limescale. Leave to act for up to 30 minutes. To dissolve external limescale residue, place the pot in a larger container and proceed as described. Then rinse the container thoroughly with water.

Removal of stubborn limescale and urine sediment (yellow streaks) Add approx. 3 dl to the water in the toilet bowl. Leave the solution to take effect for as long as necessary; brush and flush. If there are yellow streaks or particularly stubborn residue in your toilet, apply durgol forte using a soaked cloth, allow the product to take effect for up to 30 minutes, then brush and flush. If necessary, also descale your cistern (attention: if the cistern has metal screws, use durgol universal instead of durgol forte).

E.g. heavy limescale deposits on exposed bricks, on facades or concrete structures, in fountains, on stairs, in car washes.